Accessing the World Wide Web, a working Ethernet connection is indispensable. Nonetheless, there are circumstances in which you might notice that your Ethernet cable is connected, but you cannot seem to access the Internet. This can be a vexing situation, especially if you depend on the Internet for important work-related or personal matters.
Luckily, there are numerous effective troubleshooting methods that you can try to rectify this predicament. In this article, we will go through some of the most common fixes step by step to help you alleviate the problem.
Ethernet Connected But No Internet: 7 Ways To Easily Fix It
Solution 1: Restart your Router/Modem & Computer
Commence by restarting your computer and router/modem. The first step involves resetting your home network. Here is how to do it:
Step 1: Begin by turning off your device.
Step 2: Afterward, turn off your router and modem and disconnect them from the power source.
Step 3: Leave the devices off for several minutes.
Step 4: Reconnect all these devices to power, and turn them back on.
Step 5: Check to see if this fixes your Internet connection error.
Solution 2: Check the cable
Alternatively, you can check your Ethernet connection. Perhaps the issue is with the cable connection. Ensure the cable is properly connected. If it is, then try connecting it to another port, or replacing your cable with a new one. Then see if this fixes your issue.
Solution 3: Check your DNS settings
Another method involves checking your DNS settings. The following steps can help you check your DNS settings:
Step 1: Press Win + R on your keyboard.
Step 2: Type “ncpa.cpl” and press Enter on your keyboard.
Step 3: Right-click your network connection (“Ethernet” for wired connection, and “Wi-Fi” for wireless), and select Properties.
Step 4: Double click Internet Protocol Version 4(TCP/IPv4).
Step 5: Make sure “Obtain an IP address automatically” and “Obtain DNS server address automatically” are selected, then click OK. If they’re already checked, skip this step and move on to step 7.
Step 6: Give your Internet connection a quick check to see if that did the trick. If not, move on to the next step.
Step 7: Choose to Use the following DNS server addresses, then enter the Google public DNS server addresses (8.8.8.8 / 8.8.4.4) in the respective fields.
Step 8: Click OK and give your Internet connection another test. If it’s still a no-go, move on to the final solution.
Solution 4: Reset your network settings (for Windows users)
Reset your network settings (for Windows users) This final solution requires a bit more legwork, but it’s worth a shot if all else fails. Here’s what you need to do:
Step 1: Press Win + R to open the Run dialog box.
Step 2: Type “cmd” and press Ctrl + Shift + Enter on your keyboard.
Step 3: Enter the following commands:
ipconfig /flushdns
ipconfig /renew
ipconfig /registerdns
Step 4: Close the command prompt window and restart your computer. After your computer boots back up, test your Internet connection again to see if the problem has been fixed.
Solution 5: Use a VPN
One technique that has been proven to be particularly effective in solving internet connection woes is the use of a Virtual Private Network (VPN). However, it’s important to note that if you’re not particularly tech-savvy, it may take you some time to get the hang of it.
Before we delve into the specifics of the process, you must first obtain a dependable and efficient VPN service. Be sure to avoid free VPNs, as they are often rife with issues and may cause more problems than they solve.
After obtaining and installing your preferred VPN, log in to your account and connect to the VPN server that is recommended for your device. By following these steps, you should be well on your way to resolving your internet connection woes and enjoying the vast expansion of the world wide web without any hindrances
Solution 6: Disable your Device’sSecuritySoftware
Internet connection problems can occasionally arise as a result of outdated or defective drivers, which can be an incredibly perplexing and frustrating issue. However, don’t be disheartened, as there are various solutions available to remedy this predicament.
To tackle this conundrum, you’ll first need to ascertain whether your drivers are up-to-date. This can be accomplished in one of two ways: automatically or manually. Whichever approach you prefer, the key is to make sure that you obtain the most recent driver updates from the device manufacturer’s official website.
If an update is indeed available, simply download it and install it with haste. Then, test your internet connection to see whether the issue has been resolved or not. If the problem persists, it’s time to try a different approach.
Solution 7: Technical support
Talk to a tech support specialist If none of the above solutions have worked for you, it might be time to call in the big guns. Here are a couple of ways you can get in touch with a tech support specialist:
- Ask your tech-savvy friends or family members for help.
- Search online for a local tech specialist who can help you out in person.
- Try an online Q&A platform like JustAnswer to connect with certified computer experts who can help you fix your Ethernet connection issue remotely.
To use JustAnswer’s services, simply go to their Tech Support Specialists page, describe your Ethernet connection issue in detail in the chat box, and follow their step-by-step instructions to troubleshoot and solve your problem.
Wrap up So there you have it – five effective ways to fix the “Ethernet cable connected but no Internet” issue. Whether it’s a simple restart or a more complicated DNS tweak, we hope one of these solutions helped you get your Internet connection back up and running.